This Fairlead is for the factory Warn winch or the MM front winch bumper. They're beefy, 1" thick aluminum with a large radius both on the front side as well as the back side. I used as much material as it took to get them too look proportional to the front winch plate. Also made sure the opening is plenty big to fit the rope thimbles.
Also there are two small threaded holes so that a license plate can be mounted.
Process uses 6061-T6 aluminum and had them Anodized per MIL-A-63576A Type 1 which is a teflon impregnated hard anodize. Very different from the regular anodize used by everyone (and by me on the interior parts). Most folks use a regular anodize, and some use a hard anodize but i figured I'd take it a step further.